|
TraceMaker
C++ API of the engine
|
#include <route/global_router.hpp>
Public Attributes | |
| geom::Point | a |
| < one two-pin connection | |
| geom::Point | b |
| model::LayerMask | layers_a = 0 |
| model::LayerMask | layers_b = 0 |
| copper layers each end can start on | |
| Coord | half_width = 0 |
| int | net = 0 |
| connections with the same net (> 0) share edges; 0 = shares with nothing | |
| geom::Box | box_a |
| geom::Box | box_b |
| copper of the two end pads (cut lines: which side of a line an end is on) | |
Definition at line 28 of file global_router.hpp.
| geom::Point tmk::route::GlobalNet::a |
< one two-pin connection
Definition at line 29 of file global_router.hpp.
| geom::Point tmk::route::GlobalNet::b |
Definition at line 29 of file global_router.hpp.
| geom::Box tmk::route::GlobalNet::box_a |
Definition at line 33 of file global_router.hpp.
| geom::Box tmk::route::GlobalNet::box_b |
copper of the two end pads (cut lines: which side of a line an end is on)
Definition at line 33 of file global_router.hpp.
| Coord tmk::route::GlobalNet::half_width = 0 |
Definition at line 31 of file global_router.hpp.
| model::LayerMask tmk::route::GlobalNet::layers_a = 0 |
Definition at line 30 of file global_router.hpp.
| model::LayerMask tmk::route::GlobalNet::layers_b = 0 |
copper layers each end can start on
Definition at line 30 of file global_router.hpp.
| int tmk::route::GlobalNet::net = 0 |
connections with the same net (> 0) share edges; 0 = shares with nothing
Definition at line 32 of file global_router.hpp.